全国咨询热线
冻肉切丁机维护保养:
Maintenance of frozen meat cutting machine:
1、冻肉切丁机轴承和滑动、旋转摩擦面等要选用食品级的润滑油脂来润滑，但不允许润滑油流入食品内。
1, frozen meat cutting machine bearings and sliding, rotary friction surface to choose food grade lubricating grease to lubricate, but do not allow lubricating oil into the food.
2、冻肉切丁机与肉直接接触的传动部件需要经常拆卸、清洗，还需同时检查其磨损程度，如有磨损及时更换。
2. The transmission parts of the frozen meat chice machine directly contact with the meat need to be dismantled, cleaned and disinfectant, and the wear degree should be checked at the same time, if the wear is changed in time.
3、冻肉切丁机清洁、检查并保证密封件的完好功效，也是传动系统维护保养不可缺少的工作。
3, frozen meat cutting machine cleaning, inspection and ensure the integrity of seals, is also essential for the maintenance of transmission system.
4、冻肉切丁机液体输送部件在香肠加工设备中的应用是较多的，对于此类部件，日常清洗时，要求用清水在管路内多次循环，保证清洗质量。
4. The application of the liquid parts of the frozen meat cutting machine in the sausage processing equipment is more. For this kind of parts, the clean water is required to circulate in the pipeline for many times in the daily cleaning, so as to ensure the quality of the cleaning.
5、每次使用后必须对机器进行清洗，肉类切丁机尤其是物料通过的地方和通道，保持切丁机的干净。
5, after each use, the machine must be cleaned. The meat cutting machine keeps the chop machine clean, especially in the places and passages where the material passes.
6、每次使用后，应细心检查所有的切割刀具是否有损坏或磨钝，青海水果切丁机，检查梳子刀口是否正常或损坏。每周拆卸一次圆盘切丝组合刀具和横切断组合刀具（拆卸时要小心谨慎，水果切丁机生产厂家，使用专用工具，以免伤手），并进行适当的清洗。肉类切丁机当重新装配时，切丁机须用无味的食物油进行保养，安装前必须在切丝轴和切断轴上涂抹上食物油，以保证其拆卸方便。
6, after each use, we should carefully check whether all cutting tools are damaged or blunt, Qinghai fruit cutting machine, check the mouth of the comb is normal or damaged. Disassemble a disc cutting tool and a cross cutting tool once a week (careful dismantling, the manufacturer of fruit chop machine, use special tools to avoid hurting hands) and carry out proper cleaning. When the meat cutting machine is reassembled, the cutting machine must be maintained with the tasteless food oil. The food oil must be smeared on the cutting shaft and the cutting shaft before installation, so as to ensure its convenient dismantling.
7、每两周给齿轮与链条注油一次。
7, every two weeks, the gear and the chain oil injection once.
总之，香肠加工设备传动系统的维护保养工作强调的是洁净、润滑，要勤检查、勤清洗、勤整理、勤更换，是传动系统始终处于良好的工作状态。
In a word, the maintenance work of the transmission system of the sausage processing equipment emphasizes clean and lubrication. It is necessary to check, clean, clean, and change diligently. It is the good working condition of the transmission system.
