全国咨询热线
切片机的作业原理也非常的简单，是利用冷却的滚筒对会冷凝结晶的物料进行结片，再经过锋利的刀片刮片，然后把片按照相应的大小来进行铲出，这样可以很好的来进行生产或者是进行相应的活动。
The operation principle of the slicer is also very simple. It is to use the cooled drum to flake the materials that will condense and crystallize, then scrape them with a sharp blade, and then Shovel them out according to the corresponding size. In this way, it can be well used for production or corresponding activities.
切片机在我们生活中的应用是非常多的，而它的种类也有很多，冷凝结晶也是有切片机的，用的是转鼓式的切片机。这个切片机主要是由滚筒、机架、刀片、传动部分、机壳等一些组成的，利用滚筒运转，起到一个飞轮的作用，然后通过刀片铲出不规则片，可以快速的进行切片了。
Slicers are widely used in our life, and there are many kinds of slicers. Condensing crystallization also has slicers, which use drum slicers. This slicer is mainly composed of drum, frame, blade, transmission part, casing, etc. it uses the drum to operate and play the role of a flywheel, and then shovel irregular pieces through the blade to slice quickly.
要说切片机配套的刀片，还是要是具体切的是什么物质，因为不同的物质所对应的刀片和切片机都是不一样的。刀片材质有：铜、不锈钢、锰钢、四氟乙烯、胶木、钢带，针对不同物质的硬度和化学特性来选择各种适合自己的刀片。
To say the blade matched with the slicer, or what material is cut, because the blade corresponding to different substances is different from the slicer. Blade materials include: copper, stainless steel, manganese steel, tetrafluoroethylene, bakelite and steel strip. Various blades suitable for yourself are selected according to the hardness and chemical characteristics of different substances.
切片机的外包装是不锈钢的，所以我们在日常使用的时候，应当特别注意不要使用过尖或者是过硬的东西碰到其表面，以免划伤。如果在使用一段时间之后，需要对切片机产品进行清洗的时候，工作人员应当同时卸上下的固定的螺丝，以免在拆掉一个螺丝的时候，发生危险，或者是损坏设备。
The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.
还要注意对切片机做好润滑护理，应当定期查看其的润滑情况，在添加润滑油的时候，应当保证油量充足，但不要过量。工作人员应当在每天的工作结束之后，及时将切片机内部是所有残留物料清理干净。并且要注意检查刀片的磨损情况，如果有问题的话，应及时修复或者是更换。另外，是将工作现场清理干净，而且要注意切断设备的总电源。
Also pay attention to the lubrication care of the slicer. Check its lubrication regularly. When adding lubricating oil, ensure that the amount of oil is sufficient, but not excessive. The staff shall clean up all residual materials inside the slicer in time after the end of each day's work. And pay attention to check the wear of the blade. If there is a problem, it should be repaired or replaced in time. In addition, clean the work site and pay attention to cutting off the total power supply of the equipment.
