欢迎光临济南宏泰食品机械有限公司网站!

全国咨询热线
有利于切丁作业顺利进行的保障
发布时间:2018-05-22 来源:http://www.chinafoodjx.com 发布人:admin

  虽然切丁机是一款常见的食品加工设备,且有着相应的高质量优势,但在使用该机器设备的时候,若不注意操作手法,或者是电源方面有所异常,那么,故障和危险也就会随时发生。

  Although dicing machine is a common food processing equipment, and has the corresponding high quality advantages, but in the use of the machine equipment, if you do not pay attention to the operation technique, or the power aspect is abnormal, then the fault and danger will occur at any time.

  要保证该机器设备的使用,我们可以从两方面来注意。方面就是相应的外部条件,比如电源,机器整体系统的情况等等,这些情况的完好无损,则有利于切丁作业。

  To ensure the safe use of the machine, we can draw attention from two aspects. The first is the corresponding external conditions, such as power supply, the overall system of the machine and so on. These conditions are intact, which is good for cutting operations.

  第二方面,就是工作人员的操作情况了,的操作,无任何不利行为的出现,就是确保该机器设备正常,使用的好方法。

切丁切块机

  The second side, is the operation of the staff, professional operation, without any adverse behavior, is to ensure that the machine equipment is normal, the safe use of the good method.

  在使用这一切丁机的时候,确保,就是以上所提到的外部条件的注意以及工作人员自操作技术的保证。当然,物料方面的情况也不得忽视。

  When using all these machines, ensuring safety is the attention to the external conditions mentioned above and the guarantee from the professional operation techniques of the staff. Of course, the material situation should not be ignored.

  蔬菜切丁机含有锋利的切刀、旋转的零件和高压电源,更换切料规格和维修设备时,必须断开和锁上电源,目视确认设备已经完全停止后,方可取下盖板和防护板,否则可能导致严重伤害。

  The vegetable cutting machine contains sharp cutting tools, rotating parts and high voltage power supply. When the cutting specification and maintenance equipment are replaced, the power supply must be broken and locked first. After visual confirmation that the equipment has been completely stopped, the lid and the protective plate may be removed. Otherwise, it may cause serious damage.

  a.拆除盖板和防护板以便对设备的各部分进行保养

  A. remove the cover and protective panels for maintenance of all parts of the equipment.

  b.拆开前面板和切片导盖,以保养切丁组件和润滑机器。

  B. disconnect the front panel and the section guide cover to maintain the chop assembly and the lubrication machine.

  c.拆开上料料斗以保养切片装置。

  C. disassemble the feeding hopper to maintain the slicing device.

  d.拆开切片防护板,以保养切丁组件和驱动组件。

  D. dissecting slicing guard plate to maintain cutting components and driving components.

  本文由切丁切块机为您提供,我们的网站是:http://www.chinafoodjx.com我们将以全心全意的热情为您提供更的服务,欢迎您的访问!

  This article is provided by cheding cutting machine for you. Our website is: http://www.chinafoodjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.

上一篇:多样化处理模式提高了切丁切块机的口碑
下一篇:批量切丝和定量切丝机的设置

相关新闻