欢迎光临济南宏泰食品机械有限公司网站!

全国咨询热线
切骨机的运行原理你知道是什么吗?
发布时间:2019-02-11 来源:http://www.chinafoodjx.com 发布人:admin

切骨机完全是模拟刀切的原理,由电机带动切刀上下运动,剁切骨头时不会产生肉沫,一把切刀用几年也不会损坏,加工骨头成本低。切骨机采用人工刀切骨头作业原理,切骨刀由上下反复运动,会将骨头切开,一分种能够到达60次,一小时能够切200-300公斤。
Bone cutting machine is a complete simulation of the principle of knife cutting. The motor drives the knife to move up and down. When cutting bone, it will not produce meat foam. A knife will not be damaged for several years, and the cost of processing bone is low. The bone cutting machine adopts the principle of artificial knife to cut bones. The bone cutting knife moves repeatedly from top to bottom. It can cut bones 60 times per minute and 200-300 kilograms per hour.
剁切骨头是个体力活,而且人工剁骨头功率较低,又容易发生风险,而切骨机的应用了这一难题,不光能够高 功率的剁骨头,而且操作简单安 全,完全能够满足用户的需求。没有锯屑,不会产生浪费,大程度降低了用户的生产成本,进步 功率与收益,能够说是现在抱负剁骨头的设备。
The application of bone cutting machine solves this problem. It can not only cut bone with high power, but also operate simply and safely. It can fully meet the needs of users. Without sawdust, there will be no waste, greatly reducing the production costs of users, improving power and revenue, can be said to be the aspiration of the current bone-cutting equipment.
切骨机的装置方法:
The device method of the bone cutting machine is as follows:
操作前将设备放置在水平地上,保证机器放置平稳牢靠;断定设备插头触摸良好,无松动,无水迹;
Place the equipment on the horizontal ground before operation to ensure that the machine is stable and reliable; conclude that the plug of the equipment has good touch, no loosening, no water trace;


检查旋转料筒内或运送带上是否有异物,如有异物必 须整理洁净,以免引起刀具损坏;
Check whether there are foreign bodies in the rotating barrel or on the conveyor belt. If there are foreign bodies, they must be cleaned up to avoid tool damage.
操作、调整依据所需加工的菜类选择切割模式,离心切片机用于瓜薯类硬菜的切片,竖刀部分可将叶类软菜或切好的片加工成不同规格的块、丁、菱形等各种形状;
Operate and adjust the cutting mode according to the processed vegetables. The centrifugal slicer is used to slice the hard vegetable of melon and potato. The vertical knife part can process the soft vegetable of leaves or sliced pieces into different shapes such as blocks, dices, diamonds and so on.
装置竖刀,先转动可调偏心轮,使刀架行下死点后,再使刀架向上抬起1-2毫米,使竖刀与运送带触摸后,紧固螺母把竖刀紧固在刀架上。如果刀架抬起高度小,蔬菜有或许连刀,如果刀架抬起高度过大,有或许切坏运送带。
The vertical knife is installed. The adjustable eccentric wheel is rotated to make the tool holder move to the bottom dead point, then the tool holder is lifted up by 1-2 mm. After touching the vertical knife and the conveying belt, the vertical knife is fastened to the tool holder by the fastening nut. If the lifting height of the knife holder is small, vegetables may be even knifed. If the lifting height of the knife holder is too high, it may cut the conveyor belt.
以上信息是我们切丁切块机整理发布希望对大家有所帮助我们的网站是:http://www.chinafoodjx.com
The above information is our cutting machine collation and publication hope to help you with our website is: http://www.chinafoodjx.com!

上一篇:果蔬切片机的使用注意事项!
下一篇:你知道什么是切丁机吗?

相关新闻