欢迎光临济南宏泰食品机械有限公司网站!

全国咨询热线
怎样利用果蔬清洗机大规模的清洗蔬菜?
发布时间:2019-06-06 来源:http://www.chinafoodjx.com 发布人:admin

  怎样利用果蔬清洗机大规模的清洗蔬菜?在蔬菜加工厂更常见的设备应该就是蔬菜清洗机械了,在面对大量的蔬菜时加工厂不可能需求人工经行清洗的,如今一些大型的蔬菜加工厂都是采用机械化流水线作业,运用蔬菜清洗机不只可以清洗的量产多,而且清洗可以愈加洁净。在蔬菜加工厂操作人员控制正确的清洗方式能够进步清洗效率。那么,如何应用清洗机械大范围的清洗蔬菜呢?
  How to use fruit and vegetable cleaner to clean vegetables on a large scale? In vegetable processing plants, the most common equipment should be the vegetable cleaning machinery. In the face of a large number of vegetables, the processing plants can not need manual cleaning. Today, some large vegetable processing plants are using mechanized assembly line operation. Using vegetable cleaning machine can not only clean more, but also cleaner. Operators in vegetable processing plants can improve the cleaning efficiency by controlling the correct cleaning methods. So, how to use cleaning machinery to clean vegetables on a large scale?
  蔬菜清洗机械在浸泡清洗段主要是对蔬菜停止浸泡,为粘附于蔬菜外表上的污物停止初步清洗,并对较难别离的杂质停止浸泡,使泥沙杂质在水的浸泡变得松脱,以利于在以后清洗过程当中容易冲洗。在接下来的阶段开端停止喷淋式清洗,在这一阶段中,蔬菜经过不锈钢丝编织网传送带传送,由上下两排喷头停止冲洗,起清洗作用的主要是上面的一排喷头,下面的喷头主要是靠水的压力使蔬菜处于一种层流状态,使蔬菜的各部位都能清洗到,从而到达比拟好的清洗效果。依据放射压力的不同,水放射能够分为低压水放射、中压水放射、高压水放射和超高压水放射。在本清洗机中,由于清洗的对象是叶状类蔬菜,所以我们选择低压水放射对蔬菜停止上下两个方向的冲洗,去除蔬菜外表的泥沙、微生物和局部残留农药,从而到达蔬菜清洗的目的。
  Vegetable cleaning machinery in the soaking and cleaning section mainly stops soaking vegetables, stops preliminary cleaning for the dirt adhering to the surface of vegetables, and stops soaking for the more difficult to separate impurities, so that the immersion of sediment impurities in water becomes loose, in order to facilitate easy washing in the future cleaning process. At the beginning of the next stage, spray cleaning is stopped. In this stage, vegetables are conveyed by stainless steel wire woven conveyor belt, and the top and bottom rows of sprinklers stop washing. The main cleaning function is the upper row of sprinklers. The lower row of sprinklers mainly relies on the pressure of water to make the vegetables in a laminar flow state, so that all parts of the vegetables can be cleaned to reach a comparable good level. Cleaning effect. According to the different radiation pressure, water radiation can be divided into low-pressure water radiation, medium-pressure water radiation, high-pressure water radiation and ultra-high-pressure water radiation. In this cleaning machine, because the object of cleaning is leafy vegetables, we choose low-pressure water radiation to stop washing vegetables in both directions, remove sediment, microorganisms and local pesticide residues on the surface of vegetables, so as to achieve the purpose of vegetable cleaning.
  蔬菜清洗机械正确清洗方式和维护技术
  Correct Cleaning Method and Maintenance Technology of Vegetable Cleaning Machine
  1.每次运用过后需及时清洗。确保清洁,确保无食材、物料的残渣在内;隔段时间给关键零部件、螺丝上油,选用20号机油,每次加注量以十滴为宜。
  1. Clean in time after each application. Ensure cleanliness and no residue of food and materials. Oil key parts and screw at intervals. Choose No. 20 oil. Ten drops per injection is appropriate.
  2.保送带与压菜带如发现松滑,应及时调整涨紧螺栓或调整弹簧压力恰当位置。保送带两端的拉力或压力应根本相等,否则保送带或压菜带就发作跑偏现象。
  2. If the belt is found to be loose and slippery, the tightening bolt or the spring pressure should be adjusted to the proper position in time. The tension or pressure at both ends of the belt should be basically equal, otherwise the belt will run away.
  3.客户产量大的话,可多台衔接起来清洗,清洗洁净速度快。清洗机清洗速度可调,电机采用变频调速电机。
  3. If the customer's output is large, it can be cleaned by linking up multiple sets, and the cleaning speed is fast. The cleaning speed of the cleaning machine is adjustable, and the motor adopts variable frequency speed regulating motor.
  蔬菜清洗机械的维护技术
  Maintenance Technology of Vegetable Cleaning Machine
  4、关于链条的调整
  4. Adjustment of Chains
  该调整是在马达中止之后停止的,在两链轮的中间以手指来压链条,紧缩量普通为4到9毫米之间是规范值,当一旦超越规范值得时分就调整惰轮规则紧度。
  The adjustment is stopped after the motor stops. The chain is pressed by fingers between the two sprockets. The reduction is normal between 4 and 9 mm. Once it is worth exceeding the regulation, the inert wheel is adjusted to the regular tightness.

                               果蔬清洗机
  5、是关于无段变速的改换
  5. On the Change of CVT
  无段变速齿轮箱机油之点检加油及改换,是要中止马达,严禁烟火得状况下拆掉检油塞,油刚流出为恰当之量,缺乏时补充之。
  In order to refuel and change the oil of stepless transmission gearbox, the first step is to stop the motor and strictly prohibit the removal of the oil plug under the condition of pyrotechnics. The amount of oil just flowed out is the appropriate amount, which should be supplemented in the absence of fireworks.
  6、是皮带的调整
  6. Adjustment of belt
  当马达中止之后,在在二皮带轮之中间处,以手指(中指和食指)压皮带紧缩量为7~12mm为规范值。当大于规范值时,调整惰轮规则紧度。
  When the motor is stopped, in the middle of the two pulleys, the compression of the belt with the fingers (middle finger and index finger) is 7-12 mm as the standard value. When the value is larger than the standard value, adjust the inert wheel to the regular tightness.
  7、是我们长期不运用保管
  7. We have not used custody for a long time.
  当我们要停止长时间的保管而不运用时我们就能够把各局部的泥土等的物体停止冲洗擦拭洁净,各个回转部以及皮带和链条等的附着的杂物都要完整的肃清而且各回转部及磨擦主动部,充沛注油以避免生锈现象的呈现。
  When we want to stop keeping them for a long time without using them, we can stop washing and wiping the clay and other objects in different parts. The debris attached to the turning parts, belts and chains should be completely removed and the turning parts and the friction active parts should be fully oiled to avoid the appearance of rust.
  怎样利用果蔬清洗机大规模的清洗蔬菜?为了节约水资源,清洗后的废水要回收处置反复运用。清洗后,废水中的主要成份有机械性杂质(主要是烂菜叶)和泥沙。机械性杂质可经过过滤网过滤掉,而泥沙则是成胶体状混在水里,去除它需求采用特地的设备。
  How to use fruit and vegetable cleaner to clean vegetables on a large scale? In order to save water resources, the wastewater after cleaning should be recycled, disposed and reused. After cleaning, the main components of wastewater are mechanical impurities (mainly rotten vegetable leaves) and sediment. Mechanical impurities can be filtered through a filter, while sediment is colloidal mixed in the water. Removal of it requires special equipment.

上一篇:小型切辣椒机是怎么使用和操作
下一篇:关于切药机您了解多少?

相关新闻